{"product_id":"ford-1910-tractor-operators-manual","title":"Ford 1910 Tractor Operator's Manual","description":"\u003ch2\u003eFord 1910 Tractor Operator's Manual\u003c\/h2\u003e\n\u003cp\u003eThis operator's manual is the factory operation and maintenance reference for the Ford 1910 compact diesel tractor, 68 pages of controls, operating procedure, lubrication and scheduled maintenance. It's the book that came with the machine: the instrument panel and control layout, break-in and starting procedure, separate lubrication and maintenance charts for two-wheel and four-wheel drive, and the complete specification and capacity tables. Originally published by Ford and delivered here as an instant PDF download you can read on any device or print for the shop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModels covered:\u003c\/strong\u003e Ford 1910, both two-wheel drive and four-wheel drive. The manual carries a separate lubrication and maintenance chart for each.\u003c\/p\u003e\n\u003ch3\u003eAbout the Ford 1910\u003c\/h3\u003e\n\u003cp\u003eThe 1910 is a compact Ford utility tractor built in Japan by Shibaura from 1983 to 1986 as part of Ford's Ten Compact Series. It runs a three-cylinder diesel of 103.88 cu. in. (1702 cc) on a 3.35 × 3.94 in. bore and stroke, with a 21:1 compression ratio, 1-2-3 firing order and a rated speed of 2500 rpm. Power goes through a 12 × 4 synchromesh transmission and a dual clutch, and an accessory creeper range with a 7.78:1 ratio doubles that to 24 forward and 8 reverse speeds.\u003c\/p\u003e\n\u003cp\u003eAt the back it carries a 1-3\/8 in. six-spline PTO turning 540 rpm at 2455 engine rpm, with 28.5 observed PTO horsepower, a live Category 1 three-point linkage, and a gear-type hydraulic pump rated 7.3 U.S. gpm at 2133 psi. Four-wheel drive and power steering were both options, and the capacities, tires, wheel bolt torques and weights differ between the two-wheel and four-wheel drive versions. This manual prints both side by side.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull engine, capacity, cooling, hydraulic, tire, dimension and torque figures are listed on the \u003ca title=\"Ford 1910 Tractor Specifications\" href=\"\/pages\/ford-1910-tractor-specifications\"\u003eFord 1910 specifications page\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat This Manual Covers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational symbols and safety precautions:\u003c\/strong\u003e The symbol key used on the machine and in the book, followed by the full safety section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls and instruments:\u003c\/strong\u003e Seat and rollover protective structure, lighting, instrument panel, throttle controls, brake controls, differential control, transmission and PTO controls, and the hydraulic lift system controls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Break-in procedure, starting and stopping the engine, operating the transmission, four-wheel drive and PTO, towing the tractor, the differential lock, and the hydraulic lift system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriving, tread settings and weighting:\u003c\/strong\u003e Driving technique, front and rear wheel tread settings, tractor weighting with cast-iron and liquid ballast, and tire pressures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubrication and maintenance charts:\u003c\/strong\u003e One chart for the two-wheel drive tractor and one for the four-wheel drive, laying out every service point against its interval.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel and lubricants:\u003c\/strong\u003e Fuel and lubricant specifications with Ford part numbers, plus the service procedures for filters, the injection pump, the cooling system and belts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral maintenance and tractor storage:\u003c\/strong\u003e Routine maintenance across the machine, and how to put the tractor away and return it to service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral torque specification table:\u003c\/strong\u003e A dedicated fastener torque reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e Engine, capacities, cooling, electrical, fuel, clutch, brakes, steering, PTO, hydraulics, cast-iron weights, tires, wheel and ROPS bolt torques, lubricants, dimensions and ground speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety and instruction decals:\u003c\/strong\u003e Decal locations, what each one says, and their part numbers for replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-delivery and 50-hour service:\u003c\/strong\u003e The dealer check sheets and both record copies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy This Manual Matters\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo drivelines, one book.\u003c\/strong\u003e The two-wheel and four-wheel drive tractors get their own lubrication charts, tire sizes and front wheel bolt torques, so you work from the numbers for the tractor in front of you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService intervals with the right fluids.\u003c\/strong\u003e Every lubrication and maintenance point is tied to an interval, with the fluid specification and capacity called out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference data you can reassemble to.\u003c\/strong\u003e The general torque table, wheel and ROPS bolt torques, valve clearances and full system capacities are all printed here.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecal identification with part numbers.\u003c\/strong\u003e The decal section shows where each decal belongs and gives its part number.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSearchable, restored PDF.\u003c\/strong\u003e Scanned from an original manual and text-searchable, so you can jump straight to the page you need.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManual Code:\u003c\/strong\u003e SE4096B 30081660Q 038906-152\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCustomers Also Bought\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/ford-tractor-manuals\" title=\"Ford Tractor Manuals\"\u003eFord Tractor Manuals\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ford-1910-2110-tractor-service-manual\" title=\"Ford 1910 \u0026amp; 2110 Tractor Service Repair Manual\"\u003eFord 1910 \u0026amp; 2110 Tractor Service Repair Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/ford-1910-tractor-specifications\" title=\"Ford 1910 Tractor Specifications\"\u003eFord 1910 Specifications (Specs Page)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ag Manuals","offers":[{"title":"Default Title","offer_id":53103398256920,"sku":"FMC-1910-OM","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0193\/4424\/files\/ford-1910-operators-manual-1.png?v=1793474562","url":"https:\/\/agmanuals.com\/products\/ford-1910-tractor-operators-manual","provider":"Ag Manuals, LLC","version":"1.0","type":"link"}