Allis-Chalmers One-Sixty (160) Tractor Specifications
Specs Hub › Allis-Chalmers › One-Sixty (160)About this model: Built from 1968 to 1971, the Allis-Chalmers One-Sixty (160) is a mid-size utility tractor rated at approximately 54 horsepower. Powered by a Perkins three-cylinder diesel engine, it was designed for dependable field work, loader use, and general farm operations.
Engine Specifications
Manufacturer
Perkins
Engine Model
AD 3.152
Cylinders
3
Bore × Stroke
3.6 in × 5.0 in
Displacement
152.7 cu in
Compression Ratio
18.5 : 1
Rated Speed
2250 RPM
Low / High Idle
725–775 RPM / 2425–2475 RPM
Fuel Injection Pump
CAV
Injection Timing
24° BTDC
Valve Lash (Hot)
0.010 in (Intake / Exhaust)
General Specifications
Transmission
Constant-mesh helical gear, 10 forward / 2 reverse (9th & 10th synchronized)
Clutch
Dry, dual-stage
Brakes
Disc
PTO
540 RPM, 6-spline, 1-3/8 in shaft
Electrical System
12-volt, negative ground, Delco-Remy starter and alternator
Hydraulic Pump
Gear type, 6.7 GPM @ 2250 RPM
Power Steering Pump
Gear type, 7.5 GPM @ 2250 RPM
Air Cleaner
Dry type
Factory Tire Options
Front 6.00×16 • Rear 12.4×28 or 13.6×28
Gear Speeds (13.6×28 tires @ 2250 RPM)
1st Low
0.6 mph
6th High
3.7 mph
2nd Low
0.9 mph
7th High
5.4 mph
3rd Low
1.3 mph
8th High
7.4 mph
4th Low
1.9 mph
9th High
11.6 mph
5th High
2.4 mph
10th High
15.5 mph
Reverse Low
0.9 mph
Reverse High
3.7 mph
Dimensions & Capacities
Wheelbase
76 in
Overall Length
138 in
Turning Radius (Brakes / No Brakes)
108 in / 119 in
Operating Weight*
5720 lb
Fuel Tank
13.5 gal (US)
Cooling System
8 qt (US)
Engine Oil (with filter)
6.5 qt (US)
Transmission & Hydraulics
29 qt (US)
Power Steering Reservoir
2 qt (US)
*Operating weight shown with factory ballast.
← Back to all Allis-Chalmers specifications
