About this model:
The New Holland 269 Hayliner square baler is a classic model known for its reliability, simplicity, and consistent bale formation. Built with a 14" x 18" bale chamber, spring-loaded feeding system, and dependable twine or wire tying options, the 269 quickly became a favorite among farmers during the 1960s and 70s. Its rugged plunger design, tapered roller bearings, and shear-bolt protection ensured durability and reduced downtime in the field. Today, the NH 269 remains a sought-after machine for collectors, restorers, and small hay producers who appreciate the durability and proven performance of this legendary baler.
New Holland 269 Baler Specifications
| GENERAL | |
|---|---|
| Overall width | 8' 3½" |
| Overall height | 4' 1½" |
| Overall length — Bale chute up | 16' 4½" |
| Overall length — Bale chute down | 19' 3½" |
| Wheel tread | 7' 7½" |
| Weight | Approx. 2495 lbs |
| Wheel bearing | Tapered roller |
| Tongue offset | 34" |
| TIRE SIZES | |
| Right | 5.00 x 15, 4 ply — 28 psi |
| Left | 6.40 x 15, 6 ply — 44 psi |
| Pick-up (optional) | 3.00 x 12 — semi-pneumatic |
| Left hand dual (optional) | Recommend 5.00 x 15 |
| BALE CHAMBER | |
| Size | 14" x 18" |
| Bale length | Adjustable 12" to 52" |
| FEEDING SYSTEM | |
| Drive | Telescoping linkage to plunger |
| Protection | Spring-loaded |
| Tines | 6 spring-loaded aluminum fingers |
| Feed opening | 266 sq. in. |
| Drive bearings | Sealed ball and tapered roller |
| KNOTTER OR TWISTER | |
| Protection | Shear bolt |
| Tying | Twine or wire |
| PLUNGER | |
| Speed | 65–75 strokes per minute |
| Stroke | 30" |
| Rollers (Twine model) | 7 sealed ball bearings (5 vertical, 2 horizontal) |
| Rollers (Wire model) | 8 sealed ball bearings (6 vertical, 2 horizontal) |
| Safety latch | Contacts crank arm |
| Crank pin | Sealed ball bearing |
| Plunger pin | Sleeve bearing with seals |
| MAIN DRIVE | |
| Flywheel diameter | 22" |
| Power | 2–3 plow tractor |
| P.T.O. | 3 joint — A.S.A.E. standard |
| Protection | Shear bolt, overrunning and slip clutch |
| Gearbox | Alloy steel gears running in oil |
| PICK-UP | |
| Width (including 5½" flare) | 61½" |
| Pick-up drive | V-belt |
| Protection | Belt acts as a clutch on driven sheave |
| Drive and driven bearings | Sealed ball |
| Reel diameter | 12" |
| Tooth bar bearings | Sealed ball |
| Number of tooth bars (Standard) | 4 |
| Number of tooth bars (Supersweep) | 6 |
| Number of teeth (Standard) | 48 |
| Number of teeth (Supersweep) | 120 |
| Tooth spacing (Standard) | 4⅜" |
| Tooth spacing (Supersweep) | 2⅝" |
Need the official New Holland Hayliner 269 Baler owner’s manual?
Download the PDF here →