Massey Ferguson MF 236 Agricultural Loader Specifications

Specs HubMassey Ferguson › MF 236

Complete specifications for the Massey Ferguson MF 236 agricultural loader, transcribed from the factory operator's manual and assembly instructions (Form No. 1448 358 M3, dated 12/77). The MF 236 is offered with a combination bucket in four widths, or a manure fork in two widths.

General Specifications

General Specifications
Maximum Lift Height 120 in.
Clearance with Bucket Dumped 91 in.
Reach at Maximum Height 23 in.
Maximum Dump Angle 52 degrees
Reach with Bucket on Ground 70 in.
Bucket Roll Back Angle 12 degrees
Digging Depth 4 in.
Breakaway Capacity 3250 lbs.
Lift Capacity 2500 lbs.
Combination Bucket Width 48, 60, 72, and 84 inches
Manure Fork Width 48 and 60 inches
Lift Cylinder Diameter 2 in. and 2-1/2 in.
Bucket Control Hydraulic
Shipping Weight, with 60 in. bucket, approximate 1380 lbs.

Combination Bucket Capacity

Combination Bucket Capacity
Bucket Width Capacity
48 inches 11 cu. ft.
60 inches 17 cu. ft.
72 inches 23 cu. ft.
84 inches 29 cu. ft.

Notes:
The source manual prints this note directly below the Lift Capacity line: "Refer to tractor Operator's Manual for proper wheel weights and liquid weight of tires."
All specifications transcribed from the specifications section of the Massey-Ferguson MF 236 agricultural loader operator's manual, Form No. 1448 358 M3, dated 12/77, originally published by Massey-Ferguson. Verify against your machine's serial number before ordering parts.

Need the complete Massey Ferguson MF 236 loader operator's manual?

Get the full manual as an instant PDF download, covering assembly instructions, hydraulic operation and controls, the lubrication and maintenance schedule, and the specification section reproduced above.

Download the Operators Manual

Other Massey Ferguson equipment covered on this site:

Manual code: 1448 358 M3

Specifications last reviewed