Massey Ferguson MF 255, MF265, and MF 275 Tractors Specifications

Below are the general dimensions for the Massey Ferguson MF 255, MF265, and MF 275 Tractors. You can find the manual here.

ENGINE:MF 255 / MF 265MF 275
Model A4 .236 A4 .248
Type Four cylinder, direct injection Four cylinder, direct injection
Cylinder Bore 3.87 inches 3.97 inches
Piston Stroke 5 inches 5 inches
Total Displacement 236 cu. ins. 248 cu. ins.
Compression Ratio 16:1 16:1
Firing Order 1-3-4-2 1-3-4-2
Valve Clearance:    
Hot 0.010 inch 0.010 inch
Cold 0.012 inch 0.012 inch
Idle Speed 725 - 775 rpm 725 - 775 rpm
Maximum Speed (No load) 2135 - 2185 rpm 2135 - 2185 rpm
Governor Built-in injection pump Built-in injection pump
Fuelinjection Pump CAV, DPA distributor type CAV, DPA distributor type
Fuel injectors CAV multi-hole type CAV multi-hole type
Fuel Filtering System 1 Filter, full flow with replaceable element 1 Filter, full flow with replaceable element

ELECTRICAL SYSTEM:

Starter Switch ............................................................................ Key operated

Starter .................................................................................. 12 volt, 4 pole

Alternator ......... 37 amp - continuous output, diode rectified A.C. type with built-in solid state regulartor

BRAKES:

Type ................................................... Independent mechanically actuated wheel brakes

with 8-3/4" multiple disc wet brakes

Steering .................................................................... Hydrostatic power steering

HYDRAULIC SYSTEM:

Lift Pump .................................................... Constant running, scotch yoke, piston type

Maximum Pressure ................................................................... 2900-3100 psi

Delivery ......................................................................... 4.0 gpm at 3000 psi

Control ................................................... Oscillating control valve on inlet side of port

Auxiliary Pump ................................................. Constant running, dual section, gear type

Delivery - External Use .......................................................... 10 gpm at 2300 psi

DIMENSIONS:

Wheel Base.................................................................................82 inches

Length Overall (Approx.):

Standard Clearance and Row Crop.........................................................135 inches

Lo-Profile................................................................................ 128 inches

Width Overall (Approx.)...................................................................... 74 inches

Wheel Tread-Front:

Lo-Profile and Standard Clearance...........................................................50"-74"

Row Crop.................................................................................51"-75"

Wheel Tread-Rear-See Page 52

Turning Radius (without Brake)...................................................Approximately 12 feet

Ground Clearance:

Standard Clearance and Row Crop.......................................................... 16 inches

Lo-Profile.................................................................................. 6 inches

Maximum Shipping Weight (Approx.):

MF 255:

Row Crop................................................................................ 5300 lbs.

Standard Clearance...................................................................... 6375 lbs.

Lo-Profile................................................................................4750 lbs.

MF 265 and MF 275:

Row Crop................................................................................ 6400 lbs.

Standard Clearance......................................................................6550 lbs.

Lo-Profile................................................................................ 5500 lbs.