| Massey Ferguson MF 560 Baler | SPECIFICATIONS |
|---|---|
| Baler Dimensions (Overall) | |
| Width | 93 inches |
| Height | 108 inches |
| Length | 168 inches |
| Weight (Total) | 4,410 lbs. |
| Drawbar Weight | 645 lbs. |
| Bale Size: | |
| Width | 60 inches |
| Diameter | 30 to 72 inches |
| Pick-Up Width | 60 inches |
| Power Take-Off RPM | 540 rpm (only) |
| Power Take-Off Type | Slip clutch protected @ 350 ft.- lbs. torque |
| Gearbox RPM | 367 rpm output @ 540 rpm input |
| Gear Backlash | 0.006" to 0.016" |
| Tractor Horsepower Required | 50 hp at PTO shaft |
| Hydraulics | From single tractor remote hydraulic control |
| Hydraulic Cylinders | Two, 2-inch diameter for operating tailgate |
| Relief Valve Pressure | 300 ± 25 psi |
| Hose Connections | ¾” - 16 SAE, "O" - ring type, male (not supplied) |
| Number Bale Forming Belts | Nine |
| Construction | 3 ply |
| Dimensions | 4 inches wide x 440 inches (without lacing) |
| Tire Size | 11L x 15, I1 Implement, 6 ply |
MF 560 BALER Specifications
Below are the general dimensions for the Massey Ferguson MF 560 Baler. You can find the manual here.