Ford 1910 & 2110 Tractor Service Manual
This service manual is the workshop repair reference for the Ford 1910 and 2110 tractors, running roughly 400 pages of description, inspection, disassembly, overhaul, and reassembly procedures. It's a true service manual — component-level teardown and repair, not just operation — organized by the manufacturer into twelve major parts, each subdivided into chapters covering general operating principles, detailed inspection and overhaul, and, where applicable, trouble shooting, special tools, and specifications. Originally published by Ford and delivered here as an instant PDF download you can read on any device or print for the bench.
Models covered: Ford 1910 · Ford 2110
About the Ford 1910 & 2110
The 1910 and 2110 are compact Ford tractors built in Japan, identified by a Tractor Identification Plate on the left side of the transmission case carrying a two-letter production prefix, serial number, model code, unit date code, and engine serial number. The manual's production date codes run from 1981 through 1985, which points to the era these machines were assembled.
Because this is factory repair documentation, it works from the actual assemblies on these tractors — the engine and lubrication system, the diesel fuel and injection equipment, the charging and starting circuits, the clutch, the transmission (including the Model 1910 non-synchromesh transmission referenced in the PTO section), the differential and rear axle, and the hydraulic lift system. These are still working machines on small farms and properties, and the procedures needed to keep them running to spec live in a book like this one rather than in generic guides.
What This Manual Covers
- Part 1 — Engine Systems: Engine and lubrication system description and overhaul, cooling system service, plus trouble shooting, specifications, and special tools for the engine.
- Part 2 — Fuel System: Diesel fuel system service including injection pump and injector work, with chapter-level specifications.
- Part 3 — Electrical Systems: Temperature and fuel gauge/sender testing, the fuel and temperature indicator gauge, battery service and capacity testing, starter and solenoid overhaul, and alternator/regulator charging-system tests (undercharging and overcharging).
- Part 4 — Clutch: Clutch operation, inspection, overhaul, and specifications.
- Part 5 — Transmission Systems: Transmission case inspection, mainshaft and input shaft removal and installation, sliding and fixed gears, reverse idler, shift rails, and side-clearance checks, with Model 2110 specifics called out.
- Part 6 — Power Take-Off System: PTO countershaft and drive service, including the Model 1910 non-synchromesh transmission reference.
- Part 7 — Differential, Rear Axle and Brakes: Differential and final drive, pinion and axle installation, rear axle housing, and brakes.
- Part 8 — Hydraulic System: Rear axle center housing and hydraulic lift service, including single-lever control and raising/lowering positions.
Why This Manual Matters
- Component-level repair, not just operation. This is a workshop service manual — it walks through tearing down and rebuilding the engine, clutch, transmission, PTO, differential, and hydraulics, which is what you need once a job goes past routine maintenance.
- The reference data the job depends on. Specifications and special-tool sections are built into the engine, fuel, clutch, and other parts so you can measure clearances and reassemble to spec rather than guess.
- Cylinder head torque patterns included. The download opens with the factory service bulletin showing stepped head-bolt torque sequences (M10/M12/M14 bolts, Steps 1-3), the kind of detail that prevents a warped head on reassembly.
- Two-model coverage in one book. Both the 1910 and 2110 are documented together, with model-specific callouts (for example, the 2110 transmission steps and the 1910 non-synchromesh transmission) where the machines differ.
- Diesel and electrical trouble shooting. Dedicated charging-system tests and engine trouble-shooting sections help you trace a fault instead of replacing parts blindly.
- Long service life, scarce documentation. These compact Fords are still in the field, but factory service literature for them is increasingly hard to find — this searchable, restored PDF puts it back in your hands.
Manual Code: SE 4370 385 Service Bulletin No. 131 (dated October 11, 1988) is included with this manual.