Specs Hub › New Holland › Hayliner 275 Baler
New Holland Hayliner 275 Baler Specifications
About the Hayliner 275: The New Holland Hayliner 275 is a small square baler built for consistent pickup feeding and reliable tying (twine or wire, depending on configuration). This specs page summarizes key factory dimensions, bale chamber size, pickup details, PTO/engine model notes, weights, tires, and common option packages owners reference.
Source: factory specification tables from the operator’s manual.
General
| Feature |
Specification |
| Overall width |
8 ft 3-5/8 in |
| Overall height (P.T.O.) |
4 ft 1-1/2 in |
| Overall height (Engine) |
6 ft 1/4 in |
| Overall length (bale chute up) |
16 ft 4-1/2 in |
| Overall length (bale chute down) |
19 ft 3-1/2 in |
| Wheel tread |
7 ft 7-5/8 in |
| Wheel bearings |
Tapered roller |
| Tongue offset |
34-5/8 in |
| Maximum road speed |
20 MPH |
Weights
| Configuration |
Weight |
| P.T.O. – Twine |
2889 lb |
| P.T.O. – Wire |
2953 lb |
| Engine – Twine |
3284 lb |
| Engine – Wire |
3348 lb |
Bale Chamber
| Feature |
Specification |
| Chamber size |
14 in × 18 in |
| Bale length |
Adjustable 12 in to 52 in |
Knotter or Twister
| Feature |
Specification |
| Protection |
Shear bolt |
| Tying |
Twine or wire |
Main Drive
| Feature |
Specification |
| Flywheel diameter |
22 in |
| Protection |
Shear bolt, over-running and slip clutches |
| Gearbox |
Alloy steel gears running in oil |
| Bearings |
Tapered roller |
Pickup
| Feature |
Specification |
| Width (incl. 5-1/2 in flare) |
61-1/2 in |
| Pickup drive |
Roller chain |
| Protection |
Slip clutch and over-running clutch |
| Drive & driven bearings |
Sealed ball |
| Reel diameter |
12 in |
| Tooth bar bearings |
Sealed ball |
| Number of tooth bars |
6 |
| Number of teeth |
120 |
| Tooth spacing |
2-5/8 in |
| Windguard |
11 finger, spring-loaded |
P.T.O. Model
| Feature |
Specification |
| Speed |
540 RPM |
| Type |
3-point — A.S.A.E. Standard |
| Protection |
Slip clutch with over-running clutch |
Engine Model
| Feature |
Specification |
| Engine |
Wisconsin VH4D — Air cooled |
| Rated condition |
1840 RPM — 23 HP |
| Plunger speed reference |
70 plunger strokes/minute |
| Electrical system |
12 volt, negative ground |
| Fuel tank capacity |
10.5 gal |
Feeding System
| Feature |
Specification |
| Drive |
Telescoping linkage to plunger |
| Protection |
Spring-loaded |
| Tines |
6 spring-loaded aluminum fingers |
| Feed opening |
266 square inches |
| Drive bearings |
Sealed ball and tapered roller |
Plunger
| Feature |
Specification |
| Speed |
65–75 strokes per minute |
| Stroke |
30 in |
| Rollers |
8 sealed ball bearings (6 vertical, 2 horizontal) |
| Safety latch |
Contacts crank arm |
| Crank pin |
Sealed ball bearing |
| Plunger |
Sleeve bearing with seals |
Tire Sizes
| Position |
Specification |
| Right |
5.00 × 15, 4 ply — 28 lb pressure |
| Left |
6.40 × 15, 6 ply — 44 lb pressure |
| Pick-up |
3.00 × 12 — semi-pneumatic |
| Left hand dual (optional) |
Recommend 5.00 × 15 |
| Right hand dual (optional) |
Recommend 5.00 × 15 |
Optional Equipment
| Option |
Notes |
| Hydraformatic Bale Tension Control |
Optional |
| Multi-Luber |
Optional |
| Wagon Hitch & Loading Chute |
Optional |
| Model 53 Bale Thrower |
Optional |
| Wheel Scrapers |
Optional |
| Left Hand Dual Wheel |
Optional |
| Right Hand Dual Wheel |
Optional |
Need the New Holland Hayliner 275 baler owner’s manual?
Download the PDF here →
Manual Code: Form No. 0275-1-7½M-6-66W
← Back to all New Holland specs
