Massey Ferguson MF 8 Garden Tractor and Mower Specifications

Specs HubMassey Ferguson › MF 8

Complete specifications for the Massey Ferguson MF 8 lawn tractor and mower, transcribed from the specifications section of the factory operator's manual (Form No. 1448 291 M1, dated 10/73). The MF 8 is powered by a Tecumseh HM 80 single-cylinder engine of 18.65 cu. in., rated at 8 hp at 3600 rpm, and was offered with either a 3-speed transaxle or a Hydra Speed axle.

Capacities

Capacities
Fuel Tank 1 U.S. gal.
Engine Crankcase 24 U.S. ozs.
Transaxle, 3-Speed Transmission 3 U.S. pts.
Axle, Hydra Speed 2.75 U.S. pts.

Dimensions

Dimensions
Approx. Weight with Mower, Recoil Start 470 lbs.
Approx. Weight with Mower, Electric Start 505 lbs.
Length 58-1/2 inches
Width 32-1/2 inches
Height, top of steering wheel 36-1/2 inches
Turning Radius 5-1/2 ft., per SAE J695
Ground Clearance 5 inches
Drawbar Height 8-5/8 inches
Wheelbase 41 inches
Front Tread 25 inches
Rear Tread 24 inches
Tire Pressures, all models, front and rear 8-12 psi

Engine

Engine
Make Tecumseh
Model HM 80
Bore 3-1/16 inches
Stroke 2-17/32 inches
Displacement 18.65 cu. ins.
Brake Horsepower 8 hp at 3600 rpm (engine manufacturer's rating)
Idle Speed, no-load 1600-2100 rpm
Governed Speed, no-load 3450-3750 rpm
Battery 12 volt, 24 amp-hr.
Brake Caliper type disc

Ignition

Ignition
Spark Plug Type Champion J-8
Spark Plug Gap 0.028-0.033 inch

Mower

Mower
Type Rotary
Width 34 inches
Blades 2, timed
Drive, from tractor "V"-belt
Cutting Height 1-1/2 to 3 inches

Notes:
All figures are given in U.S. units in this manual, with no Imperial column, so no conversion check applies.
All specifications transcribed from the specifications section of the Massey-Ferguson MF 8 lawn tractor operator's manual, Form No. 1448 291 M1, dated 10/73, originally published by Massey-Ferguson. Verify against your tractor's serial number before ordering parts.

Need the complete Massey Ferguson MF 8 operator's manual?

Get the full manual as an instant PDF download, covering controls and instruments, operation, mower attachment and adjustment, the lubrication and maintenance schedule, and the specification section reproduced above.

Download the Operators Manual

Other Massey Ferguson equipment covered on this site:

Manual code: 1448 291 M1

Specifications last reviewed