Complete specifications for the Massey Ferguson MF 9 PTO baler, transcribed from the factory operator's manual (Form No. 690 691 M1). All measurements below are given with the tailgate up, as the manual specifies.
Dimensions
| Length Over-All, tailgate up, PTO machine | 15 ft. 8-1/2 in. |
|---|---|
| Width Over-All | 8 ft. 3 in. |
| Width, with dual wheels one side | 8 ft. 9-1/4 in. |
| Height, packers down, PTO machine | 4 ft. 4 in. |
| Pick-Up Width | 56 inches |
| Pick-Up Lift Height, end of lowest position of pick-up finger | 7-1/4 inches from ground |
| Machine Weight, approx., PTO machine | 2410 lbs. |
| Tread Width | 89-1/2 inches |
Bale Size
| Width and Height | 14 x 18 inches, approx. |
|---|---|
| Length | Adjustable, 12 to 50 inches, approx. |
Plunger and Gear Cases
| Plunger Stroke | 26 inches |
|---|---|
| Plunger Speed | 80 strokes per minute |
| Gear Cases | Two, equipped with tapered roller bearings |
Tires
| Left Hand | 6.40-15, inflation 40 lbs. |
|---|---|
| Right Hand | 5.00-15, inflation 40 lbs. |
PTO Drive
| PTO Drive Machine | Equipped with combination slip and over-running clutch |
|---|
Notes:
All figures are given in U.S. units in this manual, with no Imperial column, so no conversion check applies. All measurements are with the tailgate up, as printed in the source manual.
All specifications transcribed from the specifications section of the Massey-Ferguson MF 9 baler operator's manual, Form No. 690 691 M1, originally published by Massey-Ferguson. Verify against your machine's serial number before ordering parts.
Need the complete Massey Ferguson MF 9 baler operator's manual?
Get the full manual as an instant PDF download, covering controls and adjustment, twine and wire tying mechanisms, the lubrication and maintenance schedule, and the specification section reproduced above.
Related Massey Ferguson Specifications
Other Massey Ferguson equipment covered on this site: