Massey Ferguson MF 12 G Lawn and Garden Tractor Specifications

Specs HubMassey Ferguson › MF 12 G

Complete specifications for the Massey Ferguson MF 12 G lawn and garden tractor, transcribed from the factory operator's manual (Form No. 1448 280 M3, dated 1/74). The MF 12 G is powered by a Tecumseh HH 120 V-twin engine of 27.66 cu. in., rated at 12 hp at 3600 rpm (SAE Code J697), driving a 42 inch, 3-blade mower deck.

Capacities

Capacities
Component U.S. Imperial
Fuel Tank 7 qts. 5.6 qts.1
Engine Crankcase 50 ozs.
Rear Axle 4 pts. 3.2 pts.1

Dimensions

Dimensions
Length 67 inches
Height, top of steering wheel 41-3/4 inches
Width 35-1/2 inches
Ground Clearance 7 inches
Wheel Base 44 inches
Turning Radius, outside 7-1/2 ft.
Front Tread 28 inches
Rear Tread 27 or 33 inches
Tire Size and Pressure, Front 4.80/4.00-8, 25 psi; 16 x 6.50-8, 10-12 psi
Tire Size and Pressure, Rear 6 x 12, 10-12 psi; 23 x 8.50-12, 6-8 psi

Engine

Engine
Make Tecumseh
Model HH 120
Bore 3-1/2 inches
Stroke 2-7/8 inches
Displacement 27.66 cu. ins.
Brake Horsepower 12 hp at 3600 rpm (SAE Code J697)
Governed Speed, minimum 1650-1950 rpm
Governed Speed, maximum 3350-3650 rpm
Battery 12 volt, 45 amp-hr.

Ignition (Solid State)

Ignition
Spark Plug Type Champion J-8
Spark Plug Gap 0.028 inch

Mower

Mower
Blades 3, 15 in. long, 3/4 in. overlap
Cutting Width 42 inches
Cutting Height 1-1/2 to 3 inches (5 inches with lift lever)
Blade Speed 4160 rpm at tractor engine speed of 3400 rpm
Mowing Speed 3-1/2 mph, under normal conditions
Weight Approx. 135 lbs.

Notes:
1 Reproduced as printed. Both rows convert at a flattened 0.8 ratio rather than the precise 0.8327 Imperial factor: 7 U.S. quarts is 5.8 Imperial, and 4 U.S. pints is 3.3 Imperial. The same rounding shows up throughout this batch of MF manuals.
All specifications transcribed from the specifications section of the Massey-Ferguson MF 12 G operator's manual, Form No. 1448 280 M3, dated 1/74, originally published by Massey-Ferguson. Verify against your tractor's serial number before ordering parts.

Need the complete Massey Ferguson MF 12 G operator's manual?

Get the full manual as an instant PDF download, covering controls and instruments, operation, mower attachment and adjustment, the lubrication and maintenance schedule, and the specification section reproduced above.

Download the Operators Manual

Other Massey Ferguson equipment covered on this site:

Manual code: 1448 280 M3

Specifications last reviewed