Massey Ferguson MF 1200 Garden Tractor Specifications

Specs HubMassey Ferguson › MF 1200

Complete specifications for the Massey Ferguson MF 1200 garden tractor, transcribed from the factory operator's manual and assembly instructions (Form No. 1448 408 M1, dated 1/77). The MF 1200 is powered by a Kohler K301AQS single-cylinder engine of 29.07 cu. in., rated at 12 hp at 3600 rpm, driving through a Peerless 2300-series transaxle to a 42 inch, 3-blade mower deck.

Engine

Engine
Model Kohler K301AQS
Cylinders 1
Horsepower 12 at 3600 rpm
Displacement 29.07 cu. ins.
Bore 3.75 inches
Stroke 3.25 inches
Crankcase Oil Capacity 4 pints
Weight 116 lbs.
Ignition 12 volt
Fuel System Internally vented float carburetor and fuel pump
Cooling System Air cooled, 750 C.F.M.
Idle Speed 2100-2300 rpm
Governed Speed, no-load 3600 rpm
Air Intake System Intake to air cleaner through fan

Transaxle

Transaxle
Model Peerless 2300 series
System Capacity 4 U.S. qts.

Capacities and Battery

Capacities and Battery
Fuel Tank Capacity 2-3/4 gallons
Battery 12 volt, 30 amp-hr.

Chassis

Chassis
Wheelbase 47 inches
Length, overall 70-3/4 inches
Width 41-1/2 inches
Height, over steering wheel 45-1/2 inches
Ground Clearance, under step plates 13-1/2 inches
Front Wheel Tread 30 inches
Rear Wheel Tread 30-1/2 inches
Drawbar Height 8-1/4 inches

Tires

Tires
Front 16 x 6.50-8, 2 ply, Softrac Terra
Rear 23 x 10.50-12, 2 ply, Softrac Terra; 23 x 8.50-12, 2 ply, Softrac Terra; 23 x 10.50-12, 2 ply, Super Terra Grip; 23 x 8.50-12, 2 ply, Super Terra Grip

PTO

PTO
Front PTO, Standard Electric clutch with V-belt pulley and idler pulleys
Rear PTO Optional
Weight, without mower Approx. 760 lbs.

Accessories

Accessories
Accessory Code
Wheel Covers 677 585
Rear Wheel Weights 677 526
Tire Chains 10 084 A91
Implement Hitch 10 259 A91
Rear PTO 10 326 A91
Extended Drawbar 10 328 A91
Power Lift 10 329 A91
Hourmeter 10 349 A91
Rear PTO Shield 10 356 A91
Mower Mounting Ramps 10 251 A91

Mower

Mower
Blades 3, 14-1/2 inches, 3/4 inch overlap
Tip Speed, at 3650 engine rpm Approx. 18,300 ft./min.
Cutting Width 42 inches
Cutting Height, range of adjustment 1-1/2 to 4 inches
Weight Approx. 150 lbs.

Notes:
All figures are given in U.S. units in this manual, with no Imperial column, so no conversion check applies.
All specifications transcribed from the specifications section of the Massey-Ferguson MF 1200 operator's manual, Form No. 1448 408 M1, dated 1/77, originally published by Massey-Ferguson. Verify against your tractor's serial number before ordering parts.

Need the complete Massey Ferguson MF 1200 operator's manual?

Get the full manual as an instant PDF download, covering assembly instructions, controls and instruments, operation, mower attachment and adjustment, the lubrication and maintenance schedule, and the specification section reproduced above.

Download the Operators Manual

Other Massey Ferguson equipment covered on this site:

Manual code: 1448 408 M1

Specifications last reviewed