Home » Massey Ferguson MF 2200 Industrial Tractor Specifications

Massey Ferguson MF 2200 Industrial Tractor Specifications

Specs Hub › Massey Ferguson › MF 2200 Industrial

Complete specifications for the Massey Ferguson MF 2200 industrial tractor, transcribed from the specifications section of the factory operator's manual (Form No. 690 817 M1, dated 10/66). The MF 2200 was offered with a choice of a 134 cu. in. gasoline engine (4-cylinder, 39 hp at 2000 rpm) or a 152.7 cu. in. diesel (3-cylinder, 42 hp at 2000 rpm), and is unusual among the MF tractors in this batch for its industrial-duty power train: a torque converter option (2.12:1 multiplication) alongside three distinct transmission choices.

Three transmissions were offered: an Instant Reverse unit with hydraulically actuated multiplate clutches giving 4 forward and 4 reverse speeds, a Manual Shuttle unit with a manually shifted splined coupler giving 6 forward and 6 reverse, and a Manual Shift unit giving 6 forward and 2 reverse. Steering is hydrostatic power steering at 3-1/4 turns stop-to-stop. This manual's specifications section is unusually data-rich for the batch, with full drawbar performance and torque converter stall figures alongside the travel-speed tables reproduced below.

Jump to Section:

General

Tire Size, Front 7.50-16, 6 ply rating
Tire Size, Rear 14.9-24, 6 ply rating
Shipping Weight, Gasoline 3700 lbs., with hydraulic linkage and flat top fenders
Shipping Weight, Diesel 3900 lbs., with hydraulic linkage and flat top fenders

Dimensions

Over-All Length 119 inches
Over-All Width, on 60 in. tread 75 inches
Wheel Base 78-3/4 inches
Over-All Height 63 inches
Ground Clearance 13-3/4 inches
Curb Clearance, with brakes 22 ft. circle
Curb Clearance, without brakes 28-1/2 ft. circle

Capacities

Component Gas Diesel
Cooling System 10 qts. 10 qts.
Fuel Tank 15 gals. 15 gals.
Engine Crankcase 5 qts. 6 qts.
Torque Converter 11 qts. 11 qts.
Transmission and Differential 8 gals. (hydraulic linkage) / 9 gals. (no hydraulic linkage) 8 gals. (hydraulic linkage) / 9 gals. (no hydraulic linkage)
Steering System 1-2/3 qts. 1-2/3 qts.

Engine

Specification Gas Diesel
Number of Cylinders 4 3
Bore 3.3125 inches 3.6 inches
Stroke 3.875 inches 5 inches
Displacement 134 cu. ins. 152.7 cu. ins.
Horsepower, engine with all standard accessories 39 at 2000 rpm 42 at 2000 rpm
Maximum Torque 115 ft.-lbs. at 1400 rpm 119 ft.-lbs. at 1300 rpm
Idle Speed 450-500 rpm 725-775 rpm
Firing Order 1-3-4-2 1-2-3
Tappet Clearance, Intake 0.016 inch, hot 0.012 inch cold, 0.010 inch hot
Tappet Clearance, Exhaust 0.018 inch, hot 0.012 inch cold, 0.010 inch hot
Spark Plug Gap 0.025 inch —
Ignition Point Gap 0.022 inch —

Battery

Specification Gas Diesel
Voltage 12 volt, negative ground 12 volt, negative ground
Capacity 41 amp-hr. (53 amp-hr. on Instant Reverse models) 95 amp-hr.

Power Train

Instant Reverse Transmission Hydraulically actuated multiplate clutches. Two speed sliding spur gear sets compounded by a planetary reduction, providing 4 forward and 4 reverse speeds.
Manual Shuttle Transmission Manually shifted splined coupler. Three speed sliding spur gear sets compounded by a planetary reduction, providing 6 forward and 6 reverse speeds.
Manual Shift Transmission Three speed sliding spur gear sets compounded by a planetary reduction, providing 6 forward and 2 reverse speeds.

Performance

Specification Gas Diesel
Approx. Horsepower, at 2000 rpm with accessories 39 42
Max. Torque, at 1400/1300 rpm 115 ft.-lbs. 119 ft.-lbs.
Drawbar Horsepower, at governed rpm 32 33
Max. Drawbar Pull, 2nd gear at 2000 rpm, total weight 6000 lb. 5000 lbs.
Max. Drawbar Pull at 39 in. height, without added weight 2500 lbs. 2600 lbs.
Torque Converter Multiplication 2.12 2.12
Max. Output Torque at Stall, with average production engine and fan 216 ft.-lbs. 227 ft.-lbs.
Stall Speed, with average production engine and fan 1,120 rpm 1,150 rpm
Output Torque at Stall, depreciated for 18 gpm loader pump 65 ft.-lbs. 93 ft.-lbs.
Stall Speed, depreciated for 18 gpm loader pump at full capacity 625 rpm 760 rpm

Travel Speeds (MPH, with 14.9-24 tires at 2000 rpm)

Manual Shift Transmission (6 forward, 2 reverse)1
Gear Gas Diesel
Low 1 1.30 1.19
Low 2 1.94 1.78
Low 3 3.56 3.27
Low R 1.78 1.60
High 1 5.20 4.77
High 2 7.76 7.13
High 3 14.25 13.10
High R 7.22 6.40
"Manual Shift Transmission" as printed — 6 forward, 6 reverse pattern1
Gear Gas Diesel
Low 1 1.80 1.57
Low R 1.63 1.42
Low 2 2.70 3.24
Low R 2.45 2.94
Low 3 4.95 4.95
Low R 4.48 4.48
High 1 7.20 6.28
High R 6.52 5.70
High 2 10.80 12.97
High R 9.78 11.75
High 3 19.80 19.80
High R 17.94 17.94
Instant Reverse Transmission (4 forward, 4 reverse)
Gear Gas Diesel
Low 1 2.16 1.60
Low R 2.17 1.61
Low 2 3.95 4.45
Low R 3.98 4.47
High 1 8.64 6.40
High R 8.69 6.43
High 2 15.80 17.80
High R 15.90 17.90

Steering

Power Steering Hydrostatic
Steering Ratio 3-1/4 turns stop-to-stop

Accessories

Code Accessory
677 309 Engine Heater Adapter (Diesel)
677 399 Engine Heater (Diesel)
677 410 Pusher Fan, 15-1/8 in. (Gas)
677 477 Pusher Fan, 15-1/2 in. (Diesel)
— Universal Swinging Drawbar
— Wide Swinging Roller Drawbar

Notes:
1 The manual's Power Train section describes three separate transmissions: Instant Reverse (4F/4R), Manual Shuttle (6F/6R), and Manual Shift (6F/2R). The travel-speed tables on page 48 print the heading "Manual Shift Transmission" twice. The first table, reproduced above, has one reverse speed per range and matches the 6F/2R Manual Shift description. The second, despite carrying the identical printed heading, has a reverse speed listed after every forward gear (6F/6R total) and matches the Manual Shuttle description instead — the heading on the second table appears to be a duplication error in the original manual. Both tables are reproduced exactly as printed, under their printed headings.
Unlike the other Massey Ferguson manuals in this batch, capacities here are given in U.S. units only; the manual prints no Imperial column, so no conversion check applies.
All specifications transcribed from the specifications section of the Massey-Ferguson MF 2200 Industrial operator's manual, Form No. 690 817 M1, dated 10/66, originally published by Massey-Ferguson. Verify against your tractor's serial number before ordering parts or setting clearances.

Need the complete Massey Ferguson MF 2200 Industrial operator's manual?

Get the full manual as an instant PDF download, covering controls and instruments, operation for both gasoline and diesel, the three transmission and torque converter options, the hydraulic system, the lubrication and maintenance schedule, and the specification section reproduced above.

Download the Operators Manual

Other Massey Ferguson tractors covered on this site:

Browse All Massey Ferguson Manuals

All Massey Ferguson specifications

Manual code: 690 817 M1

Specifications last reviewed